60mm
screw
10
1!
2!
Pre drill
hole
50kg
10
Step 14
Parts needed -
Locate the Safety Rail
(No.10)
on top of
the bunk floor, ensure the safety rail is flush
with the edge of the bunk, as shown in the
illustration.
Fix in place using 4x60mm screws through
the rail into the bunk floor.
Locate the assembled ladder flush to the
safety rail and back panel framing.
Fix in place with 1x60mm screws, through
the ladder into the Rail and 3x 40mm
screws through the ladder into the Floor
and Back Panel as shown in the diagram.
5x60mm screws
3x40mm screws
40mm
screw
Step 15
Parts needed - &
Locate the Roof Support Bar
(No. 14)
in line with the central
framing of the Gable Tops
(No.8).
Fix in place with one Corner
brace
(No. 36)
per end, using
4x30mm screws per brace.
8x30mm screws
30mm
screw
14
36
1!
2!
Pre drill
hole
14
36
14
36
Step 16
Parts needed -
Place Roof 1
(No.6)
onto the shorter
side of the building, ensuring the roof
rests into the gaps of the gable framing
and is flush to the back of the building.
Make sure the 10mm overhang on the
roof is at the apex of the building.
Secure by screwing through the roof
panel
(No.6)
into the gable below using
6x30mm screws.
Do not secure the building to the
Floor until the Roof is fitted.
6x30mm screws
6
6
30mm
screw
1!
2!
Pre drill
hole
50kg
6
Step 17
Parts needed -
Place Roof Panel 2
(No.7)
onto the
building, ensuring the roof rests into the
gaps of the gable framing and is flush to
the back of the building.
Make sure the 10mm overhang on the
roof is at the apex of the building.
Secure by screwing through the roof
panel
(No.7)
into the gable below using
8x30mm screws.
Do not secure the building to the
Floor until the Roof is fitted.
8x30mm screws
7
6
7
1!
2!
Pre drill
hole
50kg
7
30mm
screw
www.merciagardenproducts.co.uk P10
Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.