Step 2
Parts needed - & &
Place the Door Panel
(No.2)
and Back Panel
(No.3)
on a flat level surface, with the framing
facing up.
Locate the Gable Tops
(No.8)
on top of the
Back Panel
(No.3),
and Door Panel
(No.2),
ensuring to interlock the bottom board of the
gable with the top board of the panel, as
shown in the diagram.
Secure the Gable Tops
(No.8)
by screwing
through the framing using 5x50mm screws
per gable, as shown in the illustration.
Ensure to stagger screws to avoid collision.
10x50mm screws
1!
2!
Pre drill
hole
3
2
8
50mm
screw
Gable Top
Panel
2
8
3
8
Step 3
Parts needed - & &
Keep the assembled Door and Back Panels
(No.2 & 3)
on a flat level surface.
Position one Gable Block B
(No.19)
onto
the top of the gable
(No.8)
on the shortest
side, so that the angled end is flush to the
edge of the Door Panel
(No.2)
, as shown in
the illustration.
Position one Gable Block C
(No.20)
onto
the opposite side of the gable
(No.8)
so
that the angled end is flush to the edge of
the Door Panel
(No.2)
, as shown in the
illustration.
Position one Gable Block A
(No.18)
onto
the remaining space on top of the gable
(No.8)
ensuring there is a 28mm gap
between Block C
(No.20)
and block A
(No.18)
, as shown in the illustration.
Secure in place by screwing through the
blocks into the gable framing using
2x40mm screws per block.
Repeat these steps to fix the remaining
Gable Blocks to the assembled Back panel
and gable.
12x40mm screws
1!
2!
Pre drill
hole
19
2
18
19
20
40mm
screw
28mm
20
18
19
20
18
20
18
19
Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
www.merciagardenproducts.co.uk P6
