Procedure for vehicles with system
variant A
X
To determine the system variant:
X
To authorise the mobile phone: insert
the telephone module in the bracket
(
X
Switch on COMAND/the audio system; see
the separate operating instructions.
X
In COMAND/the audio system, call up the
telephone menu; see the separate operat-
ing instructions.
X
In COMAND/the audio system, select
Telephone
/
Connect device
and con-
firm.
X
In COMAND/the audio system, select
SAP
telephones
/
MB SAP module tele‐
phones
.
X
In COMAND/the audio system, select
Update
/
Search for SAP phones
.
The Bluetooth
®
names of the mobile
phones within reception range appear in
the COMAND/audio system display.
X
In COMAND/the audio system, select the
mobile phone that you wish to authorise.
A prompt asking you to enter the 16-digit
PIN appears in the COMAND/audio system
display.
X
Enter any 16-digit PIN and confirm your
entry.
X
When prompted to do so, enter the same
16-digit PIN on the mobile phone within
20 seconds and confirm.
X
Depending on the mobile phone used, you
may have to confirm a connection query
from the telephone module on the mobile
phone.
The mobile phone must be set to "auto-
matic"/"authorised: yes"; see the mobile
phone operating instructions.
X
In COMAND/the audio system, enter the
SIM card PIN and confirm.
If authorisation has been successful, the
message that the mobile phone has been
authorised appears in the COMAND/audio
system display.
Procedure for vehicles with system
variant B
X
To determine the system variant:
X
To authorise the mobile phone: insert
the telephone module in the bracket
(
X
Switch on COMAND/the audio system; see
the separate operating instructions.
X
In COMAND/the audio system, call up the
telephone menu; see the separate operat-
ing instructions.
X
Select convenience telephony; see the sep-
arate operating instructions.
X
Wait until indicator lamp
:
signals that the
telephone module is ready.
X
On the telephone module, press and hold
button
;
for approximately 3 seconds.
or
X
If a mobile phone is already connected and
the module is logged into the network: ini-
tiate a call by entering "0001".
After button
;
has been pressed, any
existing Bluetooth
®
connection to a tele-
phone will be terminated. The telephone
module reports to COMAND/the audio sys-
tem again.
X
As soon as the Bluetooth
®
connection is
available again, select the text message
14
Authorising a mobile phone
Preparation
Summary of Contents for Telephone module with bluetooth
