Mercedes-Benz Telephone module with bluetooth, Supplement Manual

Page: 14 / 32

Installing the telephone module
X Slide telephone module
;
into
bracket
:
until it audibly engages.
Activating a telephone module
The telephone module only needs to be acti-
vated if system variant A is installed in the
vehicle.
X
To determine the system variant:
(
Y
page 8).
The mobile phone must first be activated on
the telephone module in order to use them
together. After activation, the two devices are
automatically connected with each other
inside the vehicle each time they are switched
on.
X
Switch on COMAND/the audio system; see
the separate operating instructions.
X
In COMAND/the audio system, select the
telephone function; see the separate oper-
ating instructions.
X
Wait until indicator lamp
:
starts to flash
slowly.
X
On the telephone module, press and hold
button
;
for approximately 3 seconds.
Indicator lamp
:
flashes slowly.
X In COMAND/the audio system, select
Con‐
nect MB SAP module
:
.
The
Searching for activated MB SAP
module... message appears in the
COMAND/audio system display. This proc-
ess may take a few minutes.
If a telephone module has been found, the
MB SAP module found. Please wait
while connecting... message appears.
If no SAP telephone has been authorised
yet, you can search for SAP telephones.
The
Connection successful. Do you
want to search for SAP phones now?
message appears in the COMAND/audio
system display.
X
If you wish to authorise an SAP telephone,
select
Yes
and follow the instructions in
COMAND/the audio system. Further infor-
mation on authorising SAP telephones
(
Y
page 13).
X If you wish to operate the telephone mod-
ule in SIM card mode, select
No .
You can activate the telephone module on up
to eight COMAND/audio systems. The set-
tings are stored on the telephone module. If
you wish to change the telephone module,
you will have to remove it (
Y
page 26). The
telephone module does not need to be deac-
tivated to do this.
12
Activating a telephone module
Preparation