Features
171
cator lamp
1
will flash. Press the trans-
mitter button again if necessary.
Clearing the remote control memory
X
Turn the key to position 2 in the ignition
lock.
X
Press and hold transmitter buttons
2
and
4
for approximately 20 seconds until indi-
cator lamp
1
flashes rapidly.
The memory is cleared.
i
You should clear the remote control mem-
ory before selling the vehicle.
Floormat* on the driver's side
G
Risk of accident
Make sure that there is sufficient clearance
around the pedals when floormats are
used, and that the floormats are properly
secured.
The floormats must be secured at all times
using retainers and studs.
Before you drive off, make sure that the
floormats are secure and rectify if neces-
sary. A floormat which is not properly
secured can slip and thereby interfere with
the movement of the pedals.
Do not place floormats on top of one
another.
1
Press-studs
2
Retainers
X
Slide seat backwards.
X
To fit: place the floormat in position.
X
Press stud
1
onto retainer
2
.
X
To remove: pull floormat off retainers
2
.
X
Remove the floormat.
Controls
* optional
230_AKB; 5; 4, en-GB
bjanott,
Version: 2.9.6
2008-04-08T15:09:54+02:00 - Seite 171
Z
Dateiname: 6515_3089_02_buchblock.pdf;
preflight