Replacing the wiper blades
265
Removing
Moving the wiper blades to a vertical
position
Vehicles without KEYLESS GO*
X
Make sure that the key is in position 1 or
2 in the ignition lock.
X
Set the windscreen wipers to position II
(
Y
page 93) on the combination switch.
X
When the wiper arms have reached a ver-
tical position, turn the key to position 0 and
remove it from the ignition lock.
X
Fold the wiper arm away from the wind-
screen until it engages.
X
Set the wiper blade at right angles to the
wiper arm.
Vehicles with KEYLESS GO*
X
Switch off the engine.
X
Take your foot off the brake pedal.
X
Set the windscreen wipers to position II
(
Y
page 93) on the combination switch.
X
Press the KEYLESS GO button repeatedly
until the windscreen wipers start.
X
When the wiper arms have reached a ver-
tical position, press the KEYLESS GO but-
ton again.
X
Fold the wiper arm away from the wind-
screen until it engages.
X
Set the wiper blade at right angles to the
wiper arm.
Removing the wiper blades
X
Remove the wiper blade from the retainer
on the wiper arm in the direction of the
arrow.
Fitting
X
Slide the new wiper blade into the retainer
on the wiper arm in the opposite direction
to the arrow.
X
Turn the wiper blade parallel to the wiper
arm.
X
Fold the wiper arm back onto the wind-
screen.
Practical advice
* optional
230_AKB; 5; 4, en-GB
bjanott,
Version: 2.9.6
2008-04-08T15:09:54+02:00 - Seite 265
Z
Dateiname: 6515_3089_02_buchblock.pdf;
preflight