Mercedes-Benz S-Class Saloon 2021, Owner'S Manual

Page: 76 / 621

* NNOOTE TE Damage to the seat belt for the
centre seat during installation of the child
restraint system
#
Make sure that the seat belt is not trap-
ped.
#
Fold upholstered lining 1 upwards.
#
Pull the tab on upholstered lining 1 upwards
and position it on the support surface.
Upholstered lining 1 will remain folded
upwards.
#
Attach the ISOFIX or i‑Size child restraint sys-
tem to both mounting brackets 2 in the vehi-
cle.
#
To close, fold upholstered lining 1 upwards.
#
Li the tab from the support surface and slide
it back into the upholstery slot between the
seat backrest and seat cushion. Close the
upholstery ap.
FFast astening a T ening a Top Tet op Tether her
&
W WARNING ARNING Risk of injury or death from
adjusting the seat a er tting a child
restraint system
Vehicles with electrically adjustable rear
bench seats:
The following may occur:
R
The Top Tether belt may sit either too loose
or too tight
R
The child restraint system may be loose,
incorrectly positioned or damaged and
then not perform its intended protective
function.
#
Never adjust the seat a er the child
restraint system has been installed.
¯
If the child restraint system is equipped
with a Top Tether belt:
The risk of injury may be reduced by Top
Tether. The Top Tether belt enables an
additional connection between the child
restraint system attached with ISOFIX or
i‑Size and the vehicle.
#
If necessary, slide head restraint 1 upwards
(
/
page 126).
#
Remove cover 2 of Top Tether anchorage
3 .
#
Fit the ISOFIX or i‑Size child restraint system
with Top Tether. In doing so, comply with the
Occupant safety 73 73