Mercedes-Benz S 320 1999, Owner'S Manual

Page: 62 / 169

6 Press switch briefly:
Combination Switch
1 Low beam (exterior lamp
switch position WSk )
2 High beam (exterior lamp
switch position 1 3 )
3 High beam flasher (high beam
available independent of
exterior lamp switch position)
4 Turn signals, right
5 Turn signals, left
P82-0006-B13
To signal minor directional
changes, such as changing lanes
on a highway, move combination
switch to the point of resistance
only and hold it there.
To operate the turn signals con­
tinuously, move the combination
switch past the point of resistance
(up or down). The switch is auto­
matically canceled when the
steering wheel is turned to a large
enough degree.
One wipe without washer water
(select only if windshield is wet)
Push switch past resistance
point:
Windshield washer, windshield
wiper; headlamp cleaning
system (only in exterior lam p
switch positions feta o r ^ 9 ) .
7 Windshield wiper
0 W iper off
1 Intermittent wiping
One initial wipe, pauses be­
tween wipes are autom atical­
ly controlled by a rain sensor
monitoring the wetness of the
windshield.
II Normal wiper speed
III Fast wiper speed
Note:
The windshield washer reservoir,
hoses and nozzles are automati­
cally heated.
Turn Signal Failure
If one of the turn signals fails,
the turn signal indicator system
flashes and sounds at a faster than
normal rate.
60