Mercedes-Benz S 320 1999, Owner'S Manual

Page: 42 / 169

F Memory button
G Position buttons
Storing seat/head restraint/
steering wheel and exterior rear
view mirror positions in memory:
Three sets of seat/head restraint/
steering wheel and exterior rear
view mirror positions may be
programmed into memoiy- After
the seat/head restraint/steering
wheel and exterior rear view
mirrors are positioned, push
memory button F, release, and
within 3 seconds push position
button “1” . A second and third set
of positions for the same seat/
head restraint/steering wheel and
exterior rear view mirrors can be
programmed into memory by
pushing first button “ F” and then
“2” , respectively “3 ”.
Note:
See Index for instructions on
adjustment of steering wheel and
mirrors.
Recalling seat/head restraint/
steering wheel and exterior rear
view mirror positions stored in
memory:
To recall a seat/head restraint/
steering wheel and exterior rear
view mirror position, push and hold
position button “ 1 ” , “2” or “3” until
seat/head restrainVsteering wheel/
and exterior rear view mirror move­
ment has stopped. The seat/head
restraint/steering wheel and
exterior rear view m irror movement
stops when the position button is
released.
Caution!
Do not remove head restraints
except when mounting seat cov­
ers. For removal and installation
refer to Head Restraints, Removal
in Index. W henever restraints have
been removed be sure to reinstall
them before driving.
40