Mercedes-Benz KABE Travel Master 2022, User Manual

Page: 55 / 134

4-3
22M-1
A B C
500 kPa 450 kPa - - -
(5,0 bar) (4,5 bar)
A B
A B C
A B
A B C
A B
500 kPa 430 kPa 400 kPa
(5,0 bar) (4,3 bar) (4,0 bar)
KABE Van
370 kPa 490 kPa - - -
(3,7 bar) (4,9 bar)
A B
KABE Van
420-480 kPa 390-430 kPa - - -
(4,2 - 4,8 bar) (3,9 - 4,3 bar)
EN
Descriptions
Page
Descriptions – Vehicle
WHEELS
The pressure and wear of tyres must be checked regularly.
After changing a wheel:
Retighten the wheel bolts after around 50 km (applies also
to new vehicles).
Aluminium rims
The tightening torque for wheel bolts in aluminium rims is
180 Nm.
Steel rims:
The tightening torque for wheel bolts in steel rims is
180 Nm.
Using the right wheel bolts for your chosen rim is vital.
Wheel bolt contact area on the rim can vary with different
rims. Using the wrong wheel bolts to fit a rim can cause
damage.
WARNING!
Check that wheel bolts are correctly
torqued during the first trip and after
wheel fitting.
Use the right type of wheel bolt.
SNOW CHAINS
For the fitting and use of snow chains, see the instructions
from the manufacturer and Mercedes.
Comply with local regulations on the use of snow chains.
Tyre pressure
To counteract tyre deformation in long-term storage, pressure should be increased to 550 kPa (5,5 bars).
Recommended on-road tyre pressures: see the table.
Stated values are for cold tyres.