Mercedes-Benz KABE Travel Master 2022, User Manual

Page: 46 / 134

22M-1
3-36
Use
Page
EN
Use – Water/waste water systems
CLEANING THE GREY WATER TANK
Clean the grey water tank as follows:
1 Drain the grey water tank.
2 Place a suitable receptacle under the flushing outlet.
3 Open the grey water tank’s flushing outlet.
Remove the plug inside the grey water tank by raising
the handle and pulling up the plug.
Certain models may have a ball valve instead of a
plug.
4 Flush the inside of the tank clean.
If necessary, flush the grey water tank with a cleaning
agent for grey water tanks.
5 Collect the sludge in a container and dispose of the
contents at an approved site.
6 Close the grey water tank’s flushing outlet.
Refit the plug in the flushing outlet.
Swing the handle downward so that the plug seals the
outlet.
Flushing the tank clean
Certain models have a separate hose for flushing the tank
with water when cleaning.
The colour-marked hose is connected to the fresh water
tank.
The hose with no marking is connected to the grey water
tank.
Each hose’s valve is open when it is twisted in the hose’s
direction
Ensure that the valve is closed before the tank is refilled for
normal use.
KABE TMI:
The hoses are accessible via one of the motorhome’s load
doors.
KABE Van:
The hoses for flushing the tanks are under the worktop.
The hoses are accessible via the motorhome’s sliding door.
Remove the bottom drawer.
(To remove the drawer, see section 5, “Maintenance”.)
This also makes the grey water tank’s first cap accessible.
The grey water tank’s second cap is in the space under the
refrigerator.
The grey water tank’s third cap is in the space under the
bed, behind the wardrobe.
KABE TMI
KABE Van