Mercedes-Benz KABE Travel Master 2022, User Manual

Page: 73 / 134

4-21
22M-1
ON
OFF
21°
Alde
Compact
3020 HE
ON
OFF
EN
Descriptions
Page
HEATING LOOPS IN THE FLOOR
Heating system fluid circulates through heating loops built
into the living area’s floor.
Depending on motorhome model, floor heating is regula
-
ted in various ways.
• AGS II floor heating is integrated with the convector
system.
• AGS II Pro floor heating has its own heating circuit.
Floor heating for each model is described below.
WARNING!
Risk of leaks if the heating loops are
damaged.
Never screw or nail into the floor.
This can create leaks in the floor’s
in-built heating loops.
Heating system with AGS II Pro floor heating
The convectors heat the air, which
then rises along the walls.
AGS II Pro floor heating is recognisable from the shunt valve by the boiler.
Shunt
valve
Heating system with integrated AGS II floor heating
The convectors heat the air, which then
rises along the walls.
Floor heating temperature is the
same as that of the rest of the
heating system.
With integrated floor heating, the temperature of
the floor system is the same as that of the rest
of the heating system.
Heat from the boiler is distributed to the convec-
tors and floor heating.
The temperature in the motorhome is monitored
by the heating system’s control panel.
As necessary, the temperature of the convec-
tors and floor heating rises or falls.
There is a separate heating system for the convectors
and another for floor heating.
The convectors
The temperature in the motorhome is monitored
by the heating system’s control panel. As neces-
sary, the temperature of the convectors rises or
falls.
AGS II Pro floor heating
Start the floor heating via the heating system’s
control panel (the circulation pump icon). The
shunt valve maintains the even temperature of the
floor.
On the control panel, set the desired indoor tempera -
ture.
Adjust the floor heating’s shunt valve so that the
motorhome’s floor is pleasantly warm.
Descriptions – Heating system