appears in the remote control display and the
running time is zero minutes.
Setting the departure time
Make sure that the time set in the vehicle is
correct before setting the departure time (see
the separate operating instructions). Otherwise,
the auxiliary heating may switch on at the wrong
time and at an unsuitable location. When setting
the departure time, also observe the important
safety notes (
Y
page 140).
X
Briefly press the
u
button.
X
Press the
,
or
.
button repeatedly
until the time to be changed appears in the
display.
X
Press the
u
and
^
buttons simultane-
ously.
The
Î
symbol in the remote control display
flashes.
X
Press the
,
or
.
button to set the
desired departure time.
i
The longer you press the
,
or
.
but-
ton, the faster the time changes.
X
Press the
u
and
^
buttons simultane-
ously.
The new departure time is stored.
Activating the set departure time
X
Briefly press the
u
button.
X
Press the
,
or
.
button repeatedly
until the desired departure time appears in
the display.
X
Press the
u
button.
The
Í
symbol, the departure time and,
depending on the selected departure time,
the letter A, B or C appear in the display.
Deactivating the set departure time
X
Briefly press the
u
button.
The status of the auxiliary heating is shown in
the display.
X
Press the
.
button.
The first departure time stored appears in the
display.
X
Press the
^
button.
OFF is shown in the remote control display.
Replacing the remote control battery
Important safety notes
G
WARNING
Batteries contain toxic and corrosive substan-
ces. If batteries are swallowed, it can result in
severe health problems. There is a risk of fatal
injury.
Keep batteries out of the reach of children. If
a battery is swallowed, seek medical attention
immediately.
H
Environmental note
Batteries contain pollutants.
It is illegal to dispose of them
with the household rubbish.
They must be collected sep-
arately and disposed of in an
environmentally responsible
recycling system.
Dispose of batteries in an
environmentally responsible
manner. Take discharged
batteries to a qualified spe-
cialist workshop or to a col-
lection point for used batter-
ies.
Replacing the battery
If the battery needs to be replaced, the battery
symbol on the left of the display is shown as
empty. A CR2450 lithium battery is required
when replacing the battery.
X
Press a pointed object into recess
:
.
X
Slide battery cover
;
backwards in the direc-
tion of the arrow.
Operating the climate control system
143
Clima
te
contr
ol
Z
