Halogen headlamps
:
Dipped-beam headlamp: H7 55 W
;
Main-beam headlamp: H7 55 W
=
Turn signal: W 5 W BV
Fitting/removing the cover on the
front wheel arch
You must remove the cover from the front wheel
housing before you can change the front bulbs.
X
To remove: switch off the lights.
X
Turn the front wheel inwards.
X
Remove securing pin
;
using a suitable tool.
X
Slide cover
:
up and remove it.
X
To fit:insert cover
:
again and slide it down
until it engages.
X
Insert securing pin
;
.
Dipped-beam headlamps
X
Remove the cover in the front wheel arch
(
Y
page 127).
X
Turn housing cover
:
anti-clockwise and
remove it.
X
Turn bulb holder
;
anti-clockwise and pull
out.
X
Pull the bulb out of bulb holder
;
.
X
Insert new bulb into bulb holder
;
.
X
Insert bulb holder
;
and turn it clockwise.
X
Press on housing cover
:
and turn it to the
right.
X
Replace the cover in the front wheel arch
(
Y
page 127).
Main-beam headlamps
X
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover
:
anti-clockwise and
remove it.
X
Pull lever
=
upwards and remove bulb
holder
;
.
X
Remove the bulb from bulb holder
;
.
X
Insert the new bulb into bulb holder
;
.
Replacing bulbs (vehicles with halogen headlamps)
127
Lights
and
windsc
ree
n
wipers
Z
