The side windows and the sliding sunroof
or the panorama roof with power tilt/
sliding panel open.
Using the SmartKey
i
The SmartKey must be close to the
driver's door handle.
X
Point the tip of the SmartKey at the driver's
door handle.
X
Press and hold the
&
button until the
side windows and the panorama roof with
power tilt/sliding panel are fully closed.
X
Make sure that all the side windows and the
panorama roof with power tilt/sliding
panel are closed.
On vehicles with a panorama roof with power
tilt/sliding panel:
X
Press and hold the
&
button again until
the roller sunblinds of the panorama roof
with power tilt/sliding panel close.
X
To interrupt convenience closing:
release the
&
button.
Using KEYLESS-GO
The KEYLESS-GO key must be outside the
vehicle. All the doors must be closed.
X
Touch recessed sensor surface
:
on the
door handle until the side windows and the
panorama roof with power tilt/sliding
panel are fully closed.
i
Make sure you only touch recessed
sensor surface
:
.
X
Make sure that all the side windows and the
panorama roof with power tilt/sliding
panel are closed.
On vehicles with a panorama roof with power
tilt/sliding panel:
X
Touch recessed sensor surface
:
on the
door handle again until the roller sunblinds
of the panorama roof with power tilt/
sliding panel close.
X
To interrupt convenience closing:
release recessed sensor surface
:
on the
door handle.
Resetting the side windows
You must reset each side window if a side
window can no longer be closed fully.
X
Close all the doors.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Pull the corresponding switch on the door
control panel until the side window is
completely closed (
Y
page 89).
X
Hold the switch for an additional second.
If the side window opens again slightly:
X
Immediately pull the corresponding switch
on the door control panel until the side
window is completely closed (
Y
page 89).
X
Hold the switch for an additional second.
X
If the corresponding side window remains
closed after the button has been released,
the side window has been reset correctly.
If this is not the case, repeat the steps
above again.
Side windows
91
Opening
and
closing
Z
Summary of Contents for GLK 250 BlueTEC
