R
under the front bumper
R
very close to the front bumper
R
very close to the rear bumper
R
under the rear bumper
R
in the area immediately above the recessed
handle on the boot lid
R
very close to the exterior mirrors
You are responsible for safety at all times and
must always pay attention to your immediate
surroundings when parking and manoeuvring.
This applies to the areas behind, in front of and
beside the vehicle. You could otherwise endan-
ger yourself and others.
The 360° camera will not function or will func-
tion only to a limited extent:
R
if the doors are open
R
if the exterior mirrors are folded in
R
if the tailgate is open
R
in heavy rain, snow or fog
R
at night or in very dark places
R
if the cameras are exposed to very bright light
R
if the area is lit by fluorescent lamps or LED
lighting (the display may flicker)
R
if there is a sudden change in temperature,
e.g. when driving into a heated garage in win-
ter
R
if the camera lenses are dirty or covered
R
if the vehicle components in which the cam-
eras are fitted are damaged: In this event,
have the camera position and setting checked
at a qualified specialist workshop
Do not use the 360° camera under such cir-
cumstances. You could otherwise injure others
or damage objects when parking the vehicle.
Activation conditions
The 360° camera image can be displayed if:
R
your vehicle is equipped with a 360° camera
R
COMAND Online is switched on; see the sep-
arate COMAND Online operating instructions
R
the
360° camera
360° camera
function is activated
Activating the 360° camera using the
SYS button
X
Press the
W
button for longer than 2 sec-
onds; see the separate COMAND Online oper-
ating instructions.
The following appears depending on whether
gear
h
or
k
is selected:
R
full-screen view with image from the front
camera
R
full-screen view with image from the revers-
ing camera
Activating the 360° camera using
COMAND Online
X
Press the
W
button, see the separate
COMAND Online operating Instructions.
X
Select
System
System
by turning
cVd
the COMAND
controller and press
W
to confirm.
X
Select
360°
360° camera
camera
and press
W
to confirm.
The following appears depending on whether
gear
h
or
k
is selected:
R
a split screen with top view and the image
from the front camera or
R
a split screen with top view and the image
from the rear view camera
For further information on the COMAND con-
troller; see the separate COMAND Online oper-
ating instructions.
Switching on the 360° camera using
reverse gear
You can show images from the 360° camera
automatically by engaging reverse gear.
X
Make sure that the key is in position
2
in the
ignition lock.
X
Make sure that the
Activation by R gear
Activation by R gear
setting is active in COMAND Online, see the
separate COMAND Online operating instruc-
tions.
X
To show the 360° camera image: engage
reverse gear.
The area behind the vehicle is shown in the
COMAND display in split-screen mode:
R
vehicle with guide lines
R
top view of the vehicle
Driving systems
205
Driv
ing
and
pa
rki
ng
Z
