X
To open: turn release knob
:
anti-clockwise
and remove side trim panel
;
.
X
To close: insert side trim panel
;
and turn
release knob
:
clockwise.
Right-hand side trim panel
You must open the side trim panel in the luggage
compartment before you can replace the bulbs
in the tail lamps.
X
To open: release right-hand trim panel
:
at
the top and fold it down in the direction of the
arrow.
X
To close: insert side trim panel
:
.
Tail lamps
Due to their position, have the bulbs in the
reversing lamp (vehicles with halogen head-
lamps) and rear foglamp in the tailgate changed
at a qualified specialist workshop.
X
Switch off the lights.
X
Open the luggage compartment.
X
Open the side trim panel (
Y
page 122).
X
Release and remove connector
;
.
X
Hold the tail lamp and unscrew wing nut
:
.
X
Remove the tail lamp.
Tail lamps
X
Remove screws
=
using a screwdriver.
X
Remove the bulb holder from the tail lamp.
Bulb holder
?
Turn signal
A
Brake lamp
X
Turn signal: press the bulb gently into the
bulb holder, turn it anti-clockwise and remove
it from the bulb holder.
X
Insert the new bulb into the bulb holder and
turn it clockwise.
X
Brake lamp: remove the corresponding bulb
from the bulb holder.
X
Insert the new bulb into the bulb holder.
X
Insert the bulb holder into the tail lamp and
screw it firmly into place using screws
=
.
X
Insert the tail lamp into the vehicle.
X
Tighten wing nut
:
and re-establish contact
with connector
;
.
X
Close the side trim panel (
Y
page 122).
Replacing bulbs
123
Li
ghts
and
wind
scr
een
wip
er
s
Z
