appears for approximately three seconds at
the bottom of the screen in the multimedia
system display; see separate operating
instructions. You will see the current settings
of the various climate control functions.
DYNAMIC SELECT button (except
Mercedes-AMG vehicles)
You can choose between various drive programs
with the DYNAMIC SELECT button
(
Y
page 151).
If you have selected drive program E:
R
when heating, the electrical heater booster is
deactivated and in the warming-up phase
heat output is reduced
R
the rear window heating running time is
reduced
Depending on the configuration, the climate set-
tings can also be influenced in drive program I.
If you have selected drive program C or S, the
climate settings are not affected.
ECO start/stop function
During automatic engine stop, the climate con-
trol operates only at a reduced capacity. If you
require the full climate control output, you can
switch off the ECO start/stop function by press-
ing the ECO button (
Y
page 149).
Control panel for THERMOTRONIC automatic climate control (2-zone)
:
To set the temperature, left (
Y
page 133)
;
To set climate control to automatic mode (
Y
page 132)
=
To demist the windscreen (
Y
page 134)
?
To increase the airflow (
Y
page 134)
A
To set the air distribution (
Y
page 133)
B
Display
C
To activate/deactivate air-recirculation mode (
Y
page 135)
D
To switch the climate control on/off (
Y
page 131)
E
To set the temperature, right (
Y
page 133)
F
To switch the residual heat on/off (
Y
page 137)
G
To activate/deactivate cooling with air dehumidification (
Y
page 132)
H
To reduce the airflow (
Y
page 134)
130
Overview of climate control systems
Clima
te
contr
ol
