Mercedes-Benz EQB 2022, Operator'S Manual

Page: 346 / 450

1
Rear roof area
On vehicles with a panoramic sliding sunroof,
installing an antenna is not permitted.
Use Technical Speci cation ISO/TS 21609 (Road
Vehicles – "EMCs for installation of a ermarket
radio frequency transmitting equipment") when
retro tting two-way radios. Comply with the legal
requirements for detachable parts.
If your vehicle has installing for two-way radio
equipment, use the power supply and antenna
connectors provided in the pre-installation.
Observe the manufacturer's supplements when
installing.
TTwwo-wa
o-way r y radio tr adio transmission output ansmission output
The maximum transmission output (PEAK) at the
base of the antenna must not exceed the values in
the following table.
Fr
Freq equency band and maximum tr uency band and maximum transmission out- ansmission out-
put put
FFrreq equency band uency band Maximum tr Maximum transmis- ansmis-
sion output sion output
2 m frequency band
144 - 174 MHz 50 W
Terrestrial Trunked
Radio (TETRA)
380 - 460 MHz
10 W
70 cm frequency band
430 - 470 MHz 35 W
FFrreq equency band uency band Maximum tr Maximum transmis- ansmis-
sion output sion output
Two-way radio
2G 2 W
Two-way radio
3G/4G/5G 0.5 W
The following devices can be used in the vehicle
without restrictions:
R
Two-way radios with a maximum transmission
output of up to 100 mW
R
Two-way radios with transmitter frequencies in
the 380 - 420 MHz frequency band and a
maximum transmission output of up to 2 W
(TETRA)
R
Mobile phones (2G/3G/4G/5G)
There are no restrictions when positioning the
antenna on the outside of the vehicle for the fol-
lowing frequency bands:
R
TETRA
R
2G/3G/4G/5G
344 344 Technical data