Mercedes-Benz EQB 2022, Operator'S Manual

Page: 157 / 450

For more information on themes see .
R
Within the reset display if the previously
active drive program is unsuitable for the
transport of a roof load
For further information on the reset dis-
play, see (
/
page 155).
Selecting t Selecting the dr he drivive pr e progr ogram am
#
Press DYNAMIC SELECT switch 1 forwards
or backwards.
The drive program selected appears in the
multifunction display.
Con gur Con guring ing DDYN YNAMIC SELECT (multimedia sy AMIC SELECT (multimedia sys- s-
ttem) em)
Multimedia system:
4
©
5
Settings
5
Vehicle
5
DYNAMIC SELECT
Se Setting dr tting drivive pr e progr ogram I am I
#
Select Individual Configuration .
#
Select and set a category.
Switc Switching t hing the r he rest estor oration displa ation display on or y on or oo
#
Activate or deactivate Request at Start .
FFunction on: unction on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored.
FFunction on:
unction on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored. If the ECO
start/stop function was deactivated, an additional
prompt appears asking if the function should
remain deactivated.
%
The prompt appears only if the previously
active settings deviate from the standard set-
tings.
FFunction unction o : o : the next time the vehicle is started
the A drive program is set automatically. The
ECO start/stop function is activated automati-
cally.
%
This function must be activated for each user
pro le separately. Only when this function is
activated will the drive program and ECO
start/stop setting for the previous journey be
saved for the respective user pro le.
% This function must be activated for each user
pro le separately. The drive program for the
respective user pro le of the last driver is only
stored if this function is activated.
Driving and parking 155 155