Mercedes-Benz E-Class 2011, Owner'S Manual

Page: 122 / 409

and the kerb in the exterior mirror on
the front-passenger side.
X
Press memory button M ? and one of
the arrows on adjustment button =
within three seconds.
The parking position is stored if the
exterior mirror does not move.
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position set-
ting
X
Turn the key to position 2 in the ignition
lock.
X
Adjust the exterior mirror on the front-
passenger side with the corresponding but-
ton (
Y
page 117).
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
R
as soon as you exceed a speed of
10 km/h
R
about ten seconds after you have disen-
gaged reverse gear
R
if you press button : for the exterior mir-
ror on the driver's side
Memory function
Storing settings
G WARNING
The memory function can still be used when
the key has been removed. For this reason,
children should never be left unsupervised in
the vehicle. They could otherwise become
trapped when adjusting the seat or the steer-
ing wheel.
G WARNING
Only use the memory function on the driver's
side when the vehicle is stationary. You could
otherwise be distracted from the traffic con-
ditions by the steering wheel and seat moving
of their own accord, and as a result, cause an
accident.
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
R
position of the seat, backrest and head
restraint
R
active multicontour seat: dynamic function
level
R
driver's side: steering wheel position
R
driver's side: position of the exterior mir-
rors on the driver's and front-passenger
sides
X
Adjust the seat (
Y
page 106).
X
On the driver's side, adjust the steering
wheel (
Y
page 115) and the exterior mirrors
(
Y
page 117).
X
Briefly press the M memory button and
then press storage position button 1, 2 or
3 within three seconds.
The settings are stored in the selected pre-
set position. A tone sounds when the set-
tings have been completed.
Calling up a stored setting
X
Press and hold the relevant storage posi-
tion button 1, 2 or 3 until the seat, steering
Memory function
119
Seat
s,
st
eeri
ng
wheel
and
mirro
rs
Z