Mercedes-Benz E-Class 2011, Owner'S Manual

Page: 247 / 409

X
Press the a button to confirm.
X
Press : or 9 to select the Perma‐
nent display function.
You will see the selected setting: outside
temperature or Dig. speedom [mph] .
X
Press the a button to save the setting.
Time/date
This submenu is only available on vehicles
with Audio 20.
In the
Time/date submenu, you can set the
time and date.
Your vehicle may have the following audio
equipment:
A: Audio 20
B: Audio 50 APS
C: COMAND APS
X
Refer to the separate operating instruc-
tions to find out which audio system is fit-
ted in your vehicle.
Depending on the audio system, the time and
date are received from GPS satellites and
cannot be set using the on-board computer
(see the following table).
A B C
Setting using the on-board com-
puter
X
Automatic GPS satellite recep-
tion
X X
Setting the time zone once; see
the separate operating instruc-
tions
X X
X
Press the = or ; button on the steer-
ing wheel to select the Settings menu.
X
Press the : or 9 button to select the
Time/Date submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select
Time: or Date: .
The current time or date set is displayed.
X
Press a to change the setting.
X
Press the = or ; button to select the
display you want to change: hour, minute,
day, month, year.
X
Press the : or 9 button to set the
selected display.
X
Press the a button to store the entry.
Lights
Switching the daytime driving lights on/
off
If you have activated the
Day lights function
and the light switch is in the à position,
the daytime driving lights are automatically
switched on when the engine is running.
Depending on light conditions, the side lamps
and the dipped-beam headlamps will addi-
tionally light up.
X
Switch off the engine.
X
Press the = or ; button on the steer-
ing wheel to select the Settings menu.
X
Press the : or 9 button to select the
Light submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Day lights function.
If the Day lights have been switched on,
the cone of light and the W symbol in
the multifunction display are shown in red.
X
Press the a button to save the setting.
Switching the Intelligent Light System
on/off
If you activate the
Intell. Light Sys.
function, you activate the following functions:
R
motorway mode
R
active light function
R
cornering light function
R
extended range foglamps
244
Menus and submenus
On-boar
d
compu
ter
and
displa
ys