Mercedes-Benz E 320 BLUETEC, Operator'S Manual

Page: 446 / 522

445
Practical hints
Replacing bulbs
Rear lamps Notes on bulb replacement
앫
Only use 12 volt bulbs of the same type
and with the specified watt rating.
앫
Switch lights off before changing a bulb
to prevent short circuits.
앫
Always use a clean lint-free cloth when
handling bulbs.
앫
Your hands should be dry and free of oil
and grease.
앫
If the newly installed bulb does not light
up, visit an authorized Mercedes-Benz
Center.
Lamp Type
7
High mounted brake
lamp LED
8
Brake, tail, parking,
standing, backup lamp
and turn signal lamp.
Rear fog lamp (driver’s
side only) HiP
LED*
9
License plate lamps C 5 W
Warning!
G
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Keep bulbs out of reach of children.
Halogen lamps contain pressurized gas.
A bulb can explode if you:
앫
touch or move it when hot
앫
drop the bulb
앫
scratch the bulb
Wear eye and hand protection.
Because of high voltage in Bi-Xenon* lamps,
it is dangerous to replace the bulb or repair
the lamp and its components. We recom-
mend that you have such work done by a
qualified technician.