Mercedes-Benz E 320 BLUETEC, Operator'S Manual

Page: 201 / 522

200
Controls in detail
Good visibility
Activating exterior rear view mirror
parking position
Follow these steps to activate the mirror
parking position so that the passen-
ger-side exterior rear view mirror will be
turned downward to the stored position.
The buttons are located on the driver’s
door.
1
Driver’s side exterior rear view mirror
button
2
Adjustment button
3
Passenger-side exterior rear view
mirror button
왘
Switch on the ignition (
컄
page 37).
왘
Make sure you have stored a parking
position for the passenger-side exterior
rear view mirror (
컄
page 136).
왘
Vehicles equipped with Mirror
adjust. parking aid function in the
Convenience submenu (
컄
page 179):
Make sure the Mirror adjust. park-
ing aid function in the Convenience
submenu of the control system is
switched to
On .
왘
Press button
3
for the passenger-side
exterior rear view mirror.
왘
Place the gear selector lever in reverse
gear
R .
The passenger-side exterior rear view
mirror will be turned downward to the
stored position.
The exterior rear view mirror returns to its
previously stored driving position:
앫
10 seconds after you put the gear se-
lector lever out of position
R
앫
immediately once your vehicle exceeds
a speed of approximately 6 mph
(10 km/h)
앫
immediately when you press button
1
for driver’s side mirror.