Mercedes-Benz E 320 BLUETEC, Operator'S Manual

Page: 176 / 522

175
Controls in detail
Control system
Setting ambient lighting
Use this function to adjust the brightness
of the ambient lighting.
왘
Move the selection marker with
button
æ
or
ç
to the Lighting
submenu.
왘
Press button
j
or
k
repeatedly
until the message Ambient light lev-
el appears in the multifunction display.
The selection marker is on the current
setting.
왘
Press button
æ
or
ç
to select
the desired brightness of the ambient
lighting.
The setting 1 represents the darkest
level and setting 5 the brightest level.
The ambient light is switched off at set-
ting
0 .
Setting night security illumination
(Headlamps delayed shut-off)
Use this function to set whether you would
like the exterior lamps to remain on for
15 seconds during darkness after exiting
the vehicle and closing all doors.
With the delayed shut-off feature activated
and the exterior lamp switch in
position
U
before the engine is turned
off, the following lamps will switch on
when the engine is turned off:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
앫
Front fog lamps
If after turning off the engine you do not
open a door or do not close an opened
door, the lamps will automatically switch
off after 60 seconds.
왘
Move the selection marker with
button
æ
or
ç
to the Lighting
submenu.
왘
Press button
j
or
k
repeatedly
until the message Headlamps delayed
shut-off appears in the multifunction
display.
The selection marker is on the current
setting.
왘
Press button
æ
or
ç
to switch
Headlamps delayed shut-off On or
Off .
왘
Turn the exterior lamp switch to
position
U
before turning off the en-
gine.
컄컄