Mercedes-Benz E 320 BLUETEC, Operator'S Manual

Page: 175 / 522

174
Controls in detail
Control system
With daytime running lamp mode activated
and the exterior lamp switch in
position
M
or
U
, the low beam
headlamps are switched on when the en-
gine is running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
For more information on the daytime run-
ning lamp mode, see “Lighting”
(
컄
page 137).
Setting locator lighting
With the locator lighting feature activated
and the exterior lamp switch in
position
U
, the following lamps will
switch on during darkness when the vehi-
cle is unlocked using button
Œ
on the
SmartKey or SmartKey with
KEYLESS-GO*:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
앫
Front fog lamps
The locator lighting switches off when the
driver’s door is opened.
If you do not open a door after unlocking
the vehicle with the SmartKey, the lamps
will switch off automatically after approxi-
mately 40 seconds.
왘
Move the selection marker with
button
æ
or
ç
to the Lighting
submenu.
왘
Press button
j
or
k
repeatedly
until the message Function Surround
lighting appears in the multifunction
display.
The selection marker is on the current
setting.
왘
Press button
æ
or
ç
to switch
the locator lighting function On or Off .
왘
Turn the exterior lamp switch to
position
U
when exiting the vehicle.
The locator lighting feature is activat-
ed.
i
For safety reasons, resetting the
Lighting
submenu to factory settings while driving
(
컄
page 166) will not deactivate the daytime
running lamp mode.
The following message appears in the multifunc-
tion display:
Lighting - Cannot be com-
pletely reset to factory settings
while driving.
컄컄