Mercedes-Benz COMAND MY06 Page 132 Operator'S Manual Download

Page: 132 / 185

131

Navigation*

Route guidance

After route calculation, the system assists
route guidance using pictorial displays and
navigation announcements.

Current navigation announcements

If a navigation announcement is not readily
understood, it can be repeated at any time.

Press



The current navigation announcement
is repeated.

Cancelling navigation announcements

Press



The current announcement is can-
celled.
The next navigation announcement will
again be audible.

Switching navigation announcements
ON/OFF

Switching OFF

During a navigation announcement,
press



for approx. 2 seconds.

For a short period of time, the message

Voice announcements muted

is displayed.

Now further route guidance takes
place using only the symbols in the dis-
play. If a new route guidance cycle is
started, the announcements are auto-
matically switched ON again.

Switching ON manually

Press



The navigation displays are visible only
with activated route guidance.

To switch to the navigation display
from another display, e.g. from CD
mode, press





Two display examples are shown below.

Navigation announcements

Warning

Navigation announcements are intended to

direct you while driving without diverting

your attention from the road and driving.

Please always use this feature instead of

consulting the map display for directions.

Consulting the symbols or map display for

directions may cause you to divert your at-

tention from driving and increase your risk

of an accident.

Navigation displays

Summary of Contents for COMAND MY06


























































































































































































Search results

Summary of Contents for COMAND MY06

Reviews:

Related manuals for COMAND MY06

Brands by name

Popular brands

Mercedes-Benz COMAND MY06, Operator'S Manual

Search results

Summary of Contents for COMAND MY06

Reviews:

Related manuals for COMAND MY06

Brands by name

Popular brands