Mercedes-Benz COMAND MY06 Page 135 Operator'S Manual Download

Page: 135 / 185

134

Navigation*

Route guidance

Changing map display

The map display can be switched between
split-screen mode and full-screen mode
manually or automatically.

Split-screen mode
The map is shown on the left, while in-
formation concerning the next driving
maneuver is shown on the right.

Full-screen mode
The map covers the entire screen.

Switching manually

Press



Each time



is pressed, the system

alternates between split-screen and
full-screen display mode.

Switching automatically

See “Automatic map toggling”
(

page 145).

Route guidance ends when the selected
destination is reached.

In navigation mode, press



A prompt as to whether or not route
guidance is to be cancelled appears.

Use



to select the menu item

Yes

Press



Route guidance is cancelled. After a
short time, the Navigation main menu
appears.

Information concerning the current lo-
cation is shown in the status bar if GPS
display (

page 144) and full-screen

display are activated.

Destination reached

Cancelling route guidance

Route guidance can be continued again
in the Navigation main menu
(

page 110).

Summary of Contents for COMAND MY06


























































































































































































Search results

Summary of Contents for COMAND MY06

Reviews:

Related manuals for COMAND MY06

Brands by name

Popular brands

Mercedes-Benz COMAND MY06, Operator'S Manual

Search results

Summary of Contents for COMAND MY06

Reviews:

Related manuals for COMAND MY06

Brands by name

Popular brands