Mercedes-Benz CLS 280 2008, Owner'S Manual

Page: 275 / 329

Changing the bulbs
272
Front bulbs
Bulb Type
1
Additional turn
signal lamp
LEDs
29
2
Turn signal lamp PY 21 W
3
Dipped-beam
headlamp
H7 55 W
30
or
D1S 35 W*
31
4
Main-beam
headlamp H7 55 W
Side lamp/park-
ing lamp W 5 W
5
Front foglamp
H11 55 W
29
Rear bulbs
Bulb Type
6
Third brake
lamp
LED
29
7
Rear foglamp
HiP
29
Side lamp/park-
ing lamp
HiP
29
Reversing lamp
HiP
29
Brake lamp
HiP
29
or
LED*
29
Turn signal lamp HiP 29
8
Licence plate
lighting C 5 W
Before changing bulbs
You can replace the following bulbs:
R
Dipped-beam headlamps (vehicles with
halogen headlamps)
R
Main-beam headlamps
R
Side lamp and parking lamp
R
Turn signal lamp (front)
R
Licence plate lighting
Observe the following points:
R
Use only the bulb types specified here.
R
To prevent a short-circuit, switch off the
lights before changing a bulb.
R
Only hold bulbs with a clean, lint-free cloth.
R
Do not work with wet or greasy fingers.
R
If the new bulb still does not light up, con-
sult a qualified specialist workshop, e.g. a
Mercedes-Benz Service Centre.
i Have the headlamp setting checked reg-
ularly at a qualified specialist workshop,
e.g. a Mercedes-Benz Service Centre.
29 These bulbs must be replaced at a qualified specialist workshop, e.g. a Mercedes-Benz Service Centre.
30 Vehicles with halogen headlamps
31 Vehicles with bi-xenon headlamps*: always have these bulbs changed at a qualified specialist workshop, e.g. a Mercedes-Benz Service Centre.
Practical advice
* optional
219_AKB; 2; 4, en-GB
mkalafa, 2007-11-13T09:28:36+01:00 - Seite 272