Troubleshooting
262
Problem
Possible cause/consequence
Suggested solutions
The key cannot be turned in the
ignition lock.
The key has been in position
0 for
a considerable time.
X
Remove the key and reinsert it into the ignition lock.
X
Check the starter battery and recharge it if necessary
(
X
Start the engine.
The on-board voltage is too low.
X
Switch off non-essential consumers, e.g. seat heating* or interior
lighting, and try to turn the key again.
If this does not work:
X
Check the starter battery and recharge it if necessary
(
or
X
or
X
Consult a qualified specialist workshop.
Practical advice
* optional
219_AKB; 2; 4, en-GB
mkalafa,
2007-11-13T09:28:36+01:00 - Seite 262
Summary of Contents for CLS 280 2008
