Mercedes-Benz CLS 280 2008 Owner'S Manual Download Page 260

Page: 260 / 329

Troubleshooting

257

Automatic transmission

Problem

Possible cause/consequence

Suggested solutions

The transmission has problems
shifting gear

The transmission is losing oil.

Have the transmission checked at a qualified specialist workshop
immediately.

The acceleration ability is deteri-
orating.
The transmission no longer
changes gear.

The transmission is in emergency
mode.
It is only possible to shift into
2nd gear and reverse gear.

Stop the vehicle.

Move the selector lever to

Turn the key to position

0 in the ignition lock.

Wait at least 10 seconds before restarting the engine.

Move the selector lever to position

D or R.

D is selected, the transmission shifts into 2nd gear; if R is selec-

ted, the transmission shifts into reverse gear.

Have the transmission checked at a qualified specialist workshop
immediately.

Practical advice

219_AKB; 2; 4, en-GB
mkalafa,

2007-11-13T09:28:36+01:00 - Seite 257

Summary of Contents for CLS 280 2008










































































































































































































































































































































Search results

Summary of Contents for CLS 280 2008

Reviews:

Mercedes-Benz CLS 280 2008, Owner'S Manual, Page: 260 / 329

Search results

Summary of Contents for CLS 280 2008

Reviews: