Mercedes-Benz CLA, Owner'S Manual

Page: 385 / 525

#
Pull ller hose 1 and plug 3 out of the tyre
in ation compressor housing.
#
Insert plug 7 of ller hose 1 in the socket
on the tyre in ation compressor and then turn
it until plug 7 engages.
#
Unscrew the cap from the valve on the emer-
gency spare wheel.
#
Screw union nut 2 of ller hose 1 onto the
valve.
#
Make sure on and o switch 4 of the tyre
in ation compressor is set to 00.
#
Insert plug 3 in a socket in your vehicle.
R
Cigarette lighter socket
R
12 V socket (
/
page 125)
R
Observe the notes on the cigarette lighter in
the Digital Owner's Manual
R
Observe the notes on sockets (
/
page 125).
#
Press the start/stop button once to switch on
the power supply (
/
page 159).
#
Press on and o switch 4 on the tyre in a-
tion compressor to II.
The tyre in ation compressor is switched on.
The tyre is in ated. The tyre pressure is shown
on manometer 5 .
#
Pump the tyre to the speci ed tyre pressure.
%
The speci ed tyre pressure is stated on the
label of the emergency spare wheel.
#
When the speci ed tyre pressure has been
reached, press on and o switch 4 on the
tyre in ation compressor to 00.
The tyre in ation compressor is switched o .
#
Press the start/stop button to switch o the
power supply.
#
If the tyre pressure is higher than the speci ed
pressure, press pressure release valve button
6 until the correct tyre pressure has been
reached.
#
Unscrew union nut 2 of ller hose 1 from
the valve.
#
Screw the valve cap of the emergency spare
wheel onto the valve again.
#
Stow ller hose 1 and plug 3 in the lower
section of the tyre in ation compressor hous-
ing.
#
Stow the tyre in ation compressor in the vehi-
cle.
382 382 Wheels and tyres