Mercedes-Benz CLA, Owner'S Manual

Page: 379 / 525

Plas Plastic hub cap tic hub cap
#
TTo r o remov emove: e: turn the centre cover of the hub
cap anti-clockwise and remove the hub cap.
#
TToo t:t: make sure that the centre cover of the
hub cap is turned anti-clockwise.
#
Position the hub cap and turn the centre cover
clockwise until the hub cap engages physically
and audibly.
Aluminium hub cap Aluminium hub cap
#
TTo r o remov emove: e: position socket 2 from the tyre-
change tool kit on hub cap 1 .
#
Position wheel spanner 3 on socket 2 .
#
Using wheel spanner 3 , turn hub cap 1
anti-clockwise and remove it.
#
TToo t:t: follow the instructions above in reverse
order.
%
Speci ed Speci ed tight tightening t ening torq orque: ue: 25 Nm.
RRaising t aising the v he vehicle when c ehicle when changing a wheel hanging a wheel
RReq equir uirements: ements:
R
There are no persons in the vehicle.
R
The vehicle has been prepared for a wheel
change (
/
page 375).
Important notes on using the jack:
R
Use only a vehicle-speci c jack that has been
approved by Mercedes-Benz to raise the vehi-
cle.
R
The jack is only designed for raising and hold-
ing the vehicle for a short time while a wheel
is being changed and not for maintenance
work under the vehicle.
R
The jack must be placed on a rm, at and
non-slip surface. If necessary, use a large, at,
load-bearing, non-slip underlay.
R
The foot of the jack must be positioned verti-
cally under the jack support point.
376 376 Wheels and tyres