Checking Fuels C oolants Lubricants etc.
Replenishing Coolant
The coolant level must reach:
I
• to marking 1 if the coolant is cold,
u k
• to m arking 2 if the coolant is hot.
Do not remove radiator cap if engine
temperature is above 90°C/194°F.
Allow engine to cool down before
removing cap. The radiator contains
hot water and is under pressure.
First turn cap to first notch to re
lieve excess pressure using a rag. If
opened immediately, hot scalding
fluid and steam w ill be blown out
under pressure.
If a small am ount of coolant has
to be added (due to evaporation of
water), plain water can be added.
If a larger quantity of coolant has to
be added, a 50/50 m ixture of water
and antifreeze should be used.
The drain plugs are on the RH side
of the engine and LH bottom mount
of the radiator.
58
Summary of Contents for 280 CE 1981
