
Display messages
Possible causes/consequences and
M
Solutions
Â
Key Not Detected
(red display message)
The SmartKey is not in the vehicle.
A warning tone also sounds.
If the engine is switched off, you can no longer lock the vehicle cen-
trally or start the engine.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (
Y
page 178).
X
Locate the SmartKey.
Because there is interference from a strong source of radio waves, the
key is not detected whilst the engine is running.
A warning tone also sounds.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (
Y
page 178).
X
Insert the SmartKey into the ignition lock and bring into key mode.
Â
Remove 'Start' But‐
ton and Insert Key
R
The SmartKey detection function has a temporary malfunction or is
faulty.
R
The SmartKey is continually undetected.
A warning tone also sounds.
X
Insert the SmartKey into the ignition lock and turn it to the desired
position.
X
Visit a qualified specialist workshop.
Warning and indicator lamps in the instrument cluster
General notes
Some systems carry out a self-diagnosis when the ignition is switched on. Therefore, some indicator
and warning lamps may light up or flash temporarily. This behavior is non-critical. These indicator
and warning lamps only indicate a malfunction if they light up or flash after starting the engine or
whilst driving.
Warning and indicator lamps in the instrument cluster
315
O
n-b
oard
comp
uter
and
di
spl
ays
Z