If somebody becomes trapped:
R
release the switch immediately, or
R
press the switch in any direction during the
automatic closing process
The closing process is stopped.
Opening and closing the roller sun-
blinds
:
To open
;
To open
=
To close
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Press or pull the
2
switch in the corre-
sponding direction.
If you press the
2
switch beyond the point of
resistance, an automatic opening/closing proc-
ess is started in the corresponding direction.
You can stop automatic operation by pressing/
pulling the switch again.
Resetting the panorama roof with
power tilt/sliding panel and the roller
sunblinds
!
If the panorama roof with power tilt/sliding
panel and the roller sunblinds cannot be fully
opened or closed after resetting, contact a
qualified specialist workshop.
Reset the panorama roof with power tilt/sliding
panel and the roller sunblinds if the panorama
roof with power tilt/sliding panel or the roller
sunblinds do not move smoothly.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Pull the
2
switch repeatedly to the point of
resistance in the direction of arrow
=
until
the panorama roof with power tilt/sliding
panel is fully closed.
X
Keep the
2
switch pulled for an additional
second.
X
Pull the
2
switch repeatedly to the point of
resistance in the direction of arrow
=
until
the roller sunblinds are fully closed.
X
Keep the
2
switch pulled for an additional
second.
X
Make sure that the panorama roof with power
tilt/sliding panel and the roller sunblinds can
be fully opened again.
X
If this is not the case, repeat the steps above.
98
Sliding sunroof
Opening
and
closi
ng
