X
Press the
:
or
9
button to set
Off
,
Standard
or
Adaptive
.
When Lane Keeping Assist or Active Lane
Keeping Assist is activated, the multifunction
display shows the lane markings as bright
lines in the assistance graphic.
X
Press the
a
button to save the setting.
For further information about Lane Keeping
Assist, see (
Y
page 229).
For further information about Active Lane Keep-
ing Assist, see (
Y
page 233).
Service menu
Introduction
Depending on the equipment installed in the
vehicle, you have the following options in the
Serv.
menu:
R
Calling up display messages in message
memory (
Y
page 280)
R
Restarting the tire pressure loss warning sys-
tem (
Y
page 394) or checking the tire pres-
sure electronically (
Y
page 396)
R
Calling up the service due date
(
Y
page 360)
R
Displaying the coolant temperature (PLUG-IN
HYBRID vehicles) (
Y
page 273)
Displaying the coolant temperature
The
Coolant
menu is only available on PLUG-IN
HYBRID vehicles.
Observe the notes on coolant temperature
(
Y
page 264).
X
Press the
=
or
;
button on the steering
wheel to select the
Sett.
menu.
X
Press the
:
or
9
button to select the
Serv.
submenu.
X
Confirm by pressing
a
on the steering
wheel.
X
Press the
:
or
9
button to select the
Coolant
submenu.
X
Press
a
to confirm your selection.
The coolant temperature is shown in a bar
display.
Settings menu
Introduction
Depending on the equipment installed in the
vehicle, In the
Sett.
menu you have the follow-
ing options:
R
Changing HYBRID settings (PLUG-IN HYBRID
vehicles) (
Y
page 273)
R
Changing the instrument cluster settings
(
Y
page 274)
R
Changing the light settings (
Y
page 275)
R
Changing the vehicle settings (
Y
page 275)
R
Changing the convenience settings
(
Y
page 275)
R
Restoring the factory settings (
Y
page 276)
HYBRID submenu (PLUG-IN HYBRID
vehicles)
Setting the maximum charge current
Using the
Maximum Charge Current:
function,
you can limit the charge current value at which
the high-voltage battery should be charged.
Before charging the high-voltage battery at a
power socket, check the maximum permissible
charge current for the relevant power socket or
the building.
Only set the maximum permissible charge cur-
rent using the function if:
R
it is not possible to set the charge current on
the charging cable
R
the precise maximum permitted charge cur-
rent can only be set via the on-board com-
puter
Menus and submenus
273
On-board
computer
and
displays
Z
