Mercedes-Benz 2013 CL, Operator'S Manual, Page: 173 / 494

X
Select Navi in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Select POI Symbols on Map and press
W to confirm.
X
Select Standard Symbols , Personal
Symbols or No Symbols .
If you select Personal Symbols , the list of
points of interest appears.
X
To switch the icon display on/off: select
a point of interest by turning cVd the
COMAND controller and press W to
confirm.
Depending on the previous state of the
symbols, they will either be shown O or
hidden ª . You can switch on the symbol
displays for more than one point of interest.
i
The list shows all symbols that are
contained on the digital map across all
countries. However, not all points of
interest are available in all countries. As a
result, certain point of interest symbols
may not be displayed on the map, even if
the symbol display is switched on.
X
To exit the menu: press the % back
button.
Map information in the display
Showing text information
During route guidance, you can have map
information displayed at the bottom edge of
the display.
X
To show the menu: press W the COMAND
controller.
X
Select Navi in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
The main area is active.
X
Select Navi again and press W to confirm.
The navigation menu opens.
X
Select Text Information on Map and
press W to confirm.
A # dot indicates the current setting.
X
Select Arrival Time/Distance ,
Current Street , Geo-Coordinates or
None and press W to confirm.
X
To exit the menu: slide XVY the COMAND
controller.
Arrival time/distance to the destination
Arrival time/distance display switched on
:
Icon for destination
;
Distance to the destination
=
Icon for estimated time of arrival
?
Estimated time of arrival
You can only see this display during route
guidance. While scrolling the map
(
Y
page 169), you will see additional data, e.g.
road names, depending on the crosshair
position, if the digital map supports this data.
Road display
Road display active
:
Road names or numbers, e.g. for
highways
Navigation
171
COMAND
Z