Mercedes-Benz 2013 CL, Operator'S Manual

Page: 134 / 494

Canceling the first or second part of
individualization
X
Confirm Cancel by pressing W the
COMAND controller.
A prompt appears asking whether you
really wish to cancel.
X
Select Yes or No and press W to confirm.
If you select Yes , individualization will be
canceled. The data from the part during
which you exited is not stored.
If you select
No , the current part begins
again.
Deleting existing individualization data
X
Select Vehicle by turning cVd the
COMAND controller and press W to
confirm.
X
Select System and press W to confirm.
X
Select Voice Control and press W to
confirm.
X
Select Delete Individualization and
press W to confirm.
A prompt appears asking whether you
really wish to delete.
X
Select Yes or No and press W to confirm.
If you select No , the process will be aborted.
If you select Yes , the individualization is
deleted. You will see a message to this
effect.
Bluetooth
®
settings
General information about Bluetooth ®
Bluetooth
®
technology is the standard for
short-range wireless data transmission of up
to approximately 10 meters. Bluetooth
®
allows, for example, the exchange of vCards.
Bluetooth
®
is a registered trademark of
Bluetooth Special Interest Group (SIG) Inc.
Requirements for a Bluetooth ®
connection
You can connect mobile phones and
notebooks to COMAND.
To do so, the following conditions need to be
met:
R
Bluetooth
®
-capable devices, e.g. mobile
phones, must comply with a certain profile
in order to be connected to COMAND.
Every Bluetooth
®
device has its own
specific Bluetooth
®
name.
R
Bluetooth ® must be activated in COMAND
and on the respective Bluetooth
®
device;
see the separate operating instructions.
R the Bluetooth
®
device must be "visible" to
COMAND in order for COMAND to find and
display it. For the setting procedures,
please see the operating instructions for
the Bluetooth ® device.
i
Once a mobile phone has been
connected, reception and transmission
volume may change.
132
System settings
COMAND