Using the key
X
Turn the key to position 0 (
Y
page 75) in
the ignition lock and remove it.
The immobiliser is activated.
i
Vehicles with a selector lever: you can
only remove the key if the transmission is
in position P.
i
Vehicles with a DIRECT SELECT lever:
if you switch off the engine with the trans-
mission in position R or D, the automatic
transmission automatically shifts to N.
If you then open the driver's door or the
front-passenger door or remove the key
from the ignition, the automatic transmis-
sion shifts to P.
If you shift the automatic transmission to
N before switching off the engine, the auto-
matic transmission remains in N even when
a door is opened.
Using KEYLESS GO*
X
Press the Start/Stop button (
Y
page 75).
The engine stops and all the indicator
lamps in the instrument cluster go out
(
Y
page 27).
i
Vehicles with a DIRECT SELECT lever:
if you switch off the engine using the Start/
Stop button, the automatic transmission
automatically shifts to N. If you open the
driver's or front-passenger door, the auto-
matic transmission shifts to P.
i
The engine can be turned off while the
vehicle is in motion by pressing and holding
the Start/Stop button for three seconds.
This function operates independently from
the ECO Start/Stop automatic engine
switch-off function.
ECO start/stop function
i
The ECO Start/Stop function is only avail-
able for the A 200 CGI model with manual
transmission.
The ECO Start/Stop function ensures that the
engine is switched off automatically under
certain conditions when the vehicle is moving
slowly.
The engine starts automatically when you pull
away again.
The ECO Start/Stop function thereby helps
you to reduce the fuel consumption and emis-
sions of your vehicle.
The ECO Start/Stop function is activated
each time the engine is started using the key.
The system is automatically operational when
ECO symbol
:
is shown in the multi-function
display.
Automatic engine switch-off
The ECO Start/Stop function ensures that the
engine is switched off automatically when the
vehicle is moving slowly and you:
R
apply the brake and bring the vehicle to a
standstill
R
operate the clutch pedal
108
Driving and parking
Controls
* optional
212_AKB; 2; 4, en-GB
mkalafa,
Version: 2.11.8.1
2009-05-05T14:17:16+02:00 - Seite 108
Dateiname: 6515346702_buchblock.pdf; erzeugt am 07. May 2009 14:16:05; WK