Mercedes-Benz 2009 CLK-Class, Operator'S Manual

Page: 337 / 384

Replacing bulbs
335
Front turn signal lamp bulb
X
Turn bulb socket
3
with the bulb
counterclockwise and remove it.
X
Gently press onto the bulb and turn it
counterclockwise out of bulb socket
3
.
X
Gently press the new bulb into bulb socket
3
and turn it clockwise until it engages.
X
Place bulb socket
3
back into the housing
and turn it clockwise until it engages.
Parking and standing lamp bulb
X
Turn housing cover
2
counterclockwise
and remove it.
X
Pull out bulb socket
6
with the bulb.
X
Pull the bulb out of bulb socket
6
.
X Gently press the new bulb into bulb socket
6
.
X
Reinstall bulb socket
6
.
X
Align housing cover
2
and turn it
clockwise until it engages.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following:
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
M
.
X Open the trunk.
Tail lamp unit
X
Swing the trim panel covering the
corresponding rear lights to the side.
1
Connector
2
Tab
X
Disconnect electrical connector
1
.
X
Pull tab
2
in the direction of the arrow.
X
Remove the bulb carrier.
Bulb carrier
3
Brake lamp
4
Backup lamp
5
Rear fog lamp (driver’s side)/tail lamp
6
Tail lamp, parking and standing lamp, side
marker lamp
7
Turn signal lamp
X Depending on which bulb needs to be
replaced, gently press onto the respective
bulb and turn it counterclockwise out of its
bulb socket.
X Gently press the new bulb into its bulb
socket and turn clockwise until it engages.
Practical hints
Z