Mercedes-Benz 2008 CL-Class, Operator'S Manual

Page: 604 / 769

603
Operation
Vehicle care
2
Camera
왘
Clean inside of windshield in front of
camera
2
with a soft, non-scratching
cloth.
왘
Use recessed handles
1
to swing
camera cover up.
Cleaning the windows and the wiper
blades
왘
Make sure the hood is fully closed.
Placing wiper arms in vertical position
Vehicles with SmartKey:
왘
Turn SmartKey in starter switch
position
1 .
왘
Turn combination switch to wiper
setting
u
(
컄
page 400).
왘
With wiper arm in vertical position, turn
the SmartKey in starter switch to
position
0 .
Vehicles with KEYLESS-GO*:
왘 Make sure the vehicle’s on-board elec-
tronics have status
1 (
컄
page 366).
왘
Turn combination switch to wiper
setting
u ( 컄 page 400).
왘
Press KEYLESS-GO start/stop button
repeatedly until windshield wipers
start.
왘
Press KEYLESS-GO start/stop button
when the wiper arms are in a vertical
position.
Cleaning
왘
Fold the wiper arms forward until they
snap into place.
!
If you use a windshield cleaning product,
make sure that none of the cleaning product
comes into contact with the lens of the Night
View Assist camera.
!
The windshield wipers must be in a vertical
position before folding them away from the wind-
shield. They could otherwise damage the hood.
Never open the hood when the wiper arms are
folded forward.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status 0 ) before cleaning the windshield
and/or the wiper blades. Otherwise, the
wiper motor could suddenly turn on and
cause injury.
컄컄