Mercedes-Benz 2008 CL-Class, Operator'S Manual

Page: 197 / 769

196
Control systems
COMAND navigation (introduction)
Switching the geo-coordinate display on
or off
왘
Select “ Navi ” “ Navi ” “ Map Dis-
play ”.
The map display list appears.
왘
Select “ Coordinates ”.
The geo-coordinate display is switched
on or off, depending on the previous
status. A checkmark indicates which
status is active.
왘 Exiting menu:
Slide
o m p
or press
back button
L
in the center console
(
컄
page 84).
Setting route type
You can set the following route types:
앫 “ Fast Route ”: COMAND calculates a
route with the shortest possible (mini-
mized) driving time.
앫
“ Short Route ”: COMAND calculates a
route with the shortest possible (mini-
mized) distance taking distance and
driving time into account.
왘
Select “ Navi ” “ Navi ” “ Mode ”.
The mode list appears. A square
쐍
indi-
cates the current setting.
왘
Select route type: “ Fast Route ” or
“ Short Route ”.
왘
Exit menu: Slide
o m p
or press back
button
L
in the center console
(
컄
page 84).
Setting route mode
왘
Select “ Navi ” “ Navi ” “ Mode ”.
The mode list appears.
왘
Switching mode on or off:
Select desired modes.
Depending on the previous status, the
mode is switched on or off. A check-
mark indicates that the mode is
switched on. It is possible to switch on
more than one mode.
i
If you change the route type setting during
active route guidance, COMAND calculates a
new route. If you change the setting when route
guidance is inactive, COMAND uses the new set-
ting for the next route guidance.
i
This function allows you to set the following
options for route guidance:
앫
“Minimize Highways”
앫
“Minimize Toll Roads”
앫
“Minimize Tunnels”
앫
“Minimize Ferries/Motorail”