Mercedes-Benz 2008 CL-Class, Operator'S Manual

Page: 196 / 769

195
Control systems
COMAND navigation (introduction)
Current street
You can set whether the current street you
are driving on should be displayed in the
map.
왘
Displaying: Select “ Navi ” “ Navi ”
“ Map Display ”.
The map display list appears. A dot
R
indicates the current setting.
왘
Select “ Current Street ”.
Depending on the previous status the
display showing the current street is
switched on or off.
Geo-coordinate display
Illustration: map with geo-coordinate dis-
play switched on
1
Current height above sea level
2
Number of GPS satellites from which
signals for positioning can be received
3
Coordinate display
Display options with geo-coordinate dis-
play switched on
If the crosshair is displayed on the map
view (map was moved manually), only dis-
play
3
is visible.
It shows either the coordinates of the
crosshair or other data on the crosshair
position, e.g. a street name. The digital
map must contain relevant data in order
for this other data to be displayed.
i
There must be sufficient GPS reception for
displays
1
,
2
and
3
to be shown. Height dis-
play
1
is an approximation because the naviga-
tion system uses the GPS signals for the
calculation.
i
If there is no crosshair on the map view, dis-
plays
1
,
2
and
3
are visible. Display
3
shows the coordinates of the current vehicle po-
sition.