Mercedes-Benz 2008 C 230, Operator'S Manual

Page: 74 / 509

73
Controls in detail
Locking and unlocking
왘
Global locking: Press button
‹
.
With the trunk and doors closed:
앫
All turn signal lamps flash three
times.
앫
An acoustic signal sounds three
times.
앫
The locking knobs in the doors
move down.
앫
The anti-theft alarm system is
armed.
왘
Restoring to factory setting: Press
and hold buttons
Œ
and
‹
si-
multaneously for about 6 seconds until
battery check lamp
5
(
컄
page 70)
flashes twice.
SmartKey with KEYLESS-GO*
(Canada only)
Vehicles equipped with KEYLESS-GO come
with two SmartKeys with KEYLESS-GO,
each with remote control and a removable
mechanical key.
The KEYLESS-GO function is integrated
into the SmartKey. On these vehicles, the
validity of the SmartKey with KEYLESS-GO
is checked every time you grasp an outside
door handle.
With the KEYLESS-GO function, you can
lock and unlock the vehicle without using
the remote control buttons on the
SmartKey and start the engine without in-
serting the SmartKey in the starter switch.
The SmartKey with KEYLESS-GO centrally
locks and unlocks, when set to factory set-
tings (
컄
page 76):
앫
the doors
앫
the trunk
앫
the fuel filler flap
SmartKey with KEYLESS-GO
1 ‹
Lock button
2 Š
Opening button for trunk
(
컄
page 269)
3
Locking tab for mechanical key
4 Œ
Unlock button
5
Battery check lamp
6 Â
Panic button (
컄
page 58)
i
When any outside door handle other than
the driver’s outside door handle is grasped, the
vehicle is always centrally unlocked.
!
To prevent possible malfunction, avoid ex-
posing the SmartKey with KEYLESS-GO to high
levels of electromagnetic radiation.