445
Practical hints
Flat tire
왘
Guide the Minispare wheel onto the
wheel hub and push it on.
왘
Insert wheel bolts and tighten them
slightly.
Lowering the vehicle
왘
Lower vehicle by turning crank
counterclockwise until vehicle is
resting fully on its own weight.
왘
Remove the jack.
1
-
5
Wheel bolts
6
Wheel wrench
왘
Tighten the five wheel bolts evenly,
following the diagonal sequence
illustrated (
1
to
5
), until all bolts are
tight. Observe a tightening torque of
96 lb-ft (130 Nm).
Before storing the jack, it should be fully
collapsed, with handle folded in (storage
position).
왘
Store the jack and the other vehicle
tools in the designated storage space
underneath the trunk floor
(
컄
page 420).
Warning!
G
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
96 lb-ft (130 Nm).
i
Vehicles with TPMS (USA only):
Do not activate the tire inflation pressure
monitor (
컄
page 344) until a full size wheel/tire
with functioning sensor has been placed back
into service on the vehicle.
Summary of Contents for 2008 C 230
