135
Controls in detail
Driving and parking
SmartKey
왘
Turning off:
Turn the SmartKey in the
starter switch to position
0
and remove
it.
The immobilizer is activated.
KEYLESS-GO* (Canada only)
왘
Turning off:
Press the KEYLESS-GO
start/stop button to turn off the en-
gine.
With the driver’s door closed, the start-
er switch is now in position
1
. With the
driver’s door opened, the starter switch
is set to position
0
, same as SmartKey
removed from starter switch.
Releasing seat belts
왘
Press the seat belt release button
(
컄
page 106).
Allow the retractor to completely re-
wind the seat belt by guiding the latch
plate.
Warning!
G
Do not turn off the engine before the vehicle
has come to a complete stop. With the en-
gine not running, there is no power assis-
tance for the brake and steering systems. In
this case, it is important to keep in mind that
a considerably higher degree of effort is nec-
essary to brake and steer the vehicle.
i
In an emergency you can turn off the engine
while driving by pressing and holding the
KEYLESS-GO start/ stop button for approxi-
mately 3 seconds.
!
Make sure the seat belt retracts fully so that
the seat belt and/or latch plate cannot get
caught or pinched in the door or in the seat
mechanism. This can damage the seat belt and
impair the effectiveness of the seat belt, and/or
cause damage to the door and/or door trim pan-
el. Such damage is not covered by the
Mercedes-Benz Limited Warranty.
Damaged seat belts must be replaced. Contact
an authorized Mercedes-Benz Center.
Summary of Contents for 2008 C 230
