Mercedes-Benz 2008 C 230, Operator'S Manual

Page: 264 / 509

263
Controls in detail
3-zone automatic climate control* (Canada only)
Adjusting air distribution
Use right
a
and/or left
e
button
Z
(
컄
page 259) to adjust the air distribution
manually for each side of the passenger
compartment. The following symbols are
shown in display
d
:
왘
Press buttons
Z
(
컄
page 259) re-
peatedly until you have select the de-
sired setting and the corresponding
symbol is shown in display
d
.
The indicator lamp in button
U
goes
out. The automatic air distribution is
switched off. The air distribution is
controlled according to the selected
control setting.
Adjusting air volume
Use button
U
(
컄
page 259) for auto-
matic mode or button
·
(
컄
page 259)
or
Q
(
컄
page 259) to adjust air volume
manually.
Seven blower speeds are available for each
side of the passenger compartment.
왘
Press button
·
to decrease, or
button
Q
to increase air volume to
the desired level.
The indicator lamp in button
U
(
컄
page 259) goes out.
The air volume is adjusted correspond-
ing to the set blower speed. The auto-
matic air distribution remains switched
on.
Using driver-side settings for all tem-
perature zones
You can use the settings of the driver’s
side, such as temperature, air volume and
air distribution, for all temperature zones.
왘
Press button
z
(
컄
page 259).
The indicator lamp in the button comes
on.
The driver-side settings are used for all
temperature zones.
Symbol Function
{
Directs air to the windshield
and the side defroster vents
a
Directs air through the center,
side and rear passenger
compartment air vents
Y
Directs air to the footwells
i
You can also select a position between two
symbols with button
Z
.