Mercedes-Benz 2007 SLK 280, Operator'S Manual

Page: 398 / 473

397
Practical hints
Replacing bulbs
Low beam bulb (Halogen headlamps
only)
왘
Turn housing cover
1
counterclock-
wise and remove.
왘
Turn bulb socket
5
with the bulb
counterclockwise and remove.
왘
Pull the bulb out of bulb socket
5
.
왘
Press the new bulb into bulb socket
5
.
왘
Place bulb socket
5
back into the
lamp and turn it clockwise.
왘
Reinstall housing cover
1
.
High beam/high beam flasher bulb
(Halogen headlamps) / High beam
flasher bulb (Bi-Xenon* headlamps)
왘
Turn bulb socket
3
with the bulb
counterclockwise and remove.
왘
Pull the bulb out of bulb socket
3
.
왘
Press the new bulb into bulb socket
3
.
왘
Place bulb socket
3
back into the
lamp and turn it clockwise.
Front turn signal bulb
왘
Turn bulb socket
2
with the bulb
counterclockwise and remove.
왘
Press gently onto the bulb and turn it
counterclockwise out of bulb
socket
2
.
왘
Press the new bulb gently into bulb
socket
2
and turn it clockwise.
왘
Place bulb socket
2
back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
왘
Turn bulb socket
4
with the bulb
counterclockwise and remove.
왘
Pull the bulb out of bulb socket
4
.
왘
Press the new bulb into bulb socket
4
.
왘
Place bulb socket
4
back into the
lamp and turn it clockwise.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
왘
Turn the exterior lamp switch to
position
M
(
컄
page 109).
왘
Open the trunk lid (
컄
page 100).
Tail lamp unit
1
Bulb socket for rear fog lamp
(driver’s side only)
2
Bulb socket for turn signal lamp
3
Bulb socket for backup lamp