Mercedes-Benz 2007 SLK 280, Operator'S Manual

Page: 108 / 473

107
Controls in detail
Memory function*
왔
Memory function*
Prior to operating the vehicle, the driver
should check and adjust the seat height,
seat position fore and aft, and seat back-
rest angle if necessary, to ensure adequate
control, reach and comfort. The head re-
straint should also be adjusted for proper
height. See also the section on air bags
(
컄
page 66) for proper seat positioning.
In addition, adjust the steering wheel to
ensure adequate control, reach, operation
and comfort. Both the interior and exterior
rear view mirrors should be adjusted for
adequate rear vision.
Fasten seat belts. Infants and small
children should be seated in an appropri-
ate infant or child restraint system which is
properly secured by a lap-shoulder belt
and that complies with U.S. Federal Motor
Vehicle Safety Standards 213 and 255
and Canadian Motor Vehicle Safety
Standards 213 and 210.2.
With the memory function you can store up
to three different configurations.
Each store position on the driver’s side
includes the following settings:
앫
Seat position
앫
Steering wheel position
앫
Exterior rear view mirrors’ position
Each store position on the passenger side
includes the following setting:
앫
Seat position
The memory button and memory position
switch are located on the outer side of
each seat.
1
Memory button M
2
Memory position switch
왘
Switch on the ignition (
컄
page 37).
or
왘
Open the respective door.
Warning!
G
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.